Scope Of Delivery; Installation; Ground Attachment; Electrical Installation - GLATZ PALAZZO Style / E Montage- Und Gebrauchsanleitung

EN
|
12

2. SCOPE OF DELIVERY

• Sunshade complete with strap and crank
(motor version without crank) (1)
• Top (2)
• Ordered support tube or positioning hinge (3)
• Small parts bag with fastening material and theft protection (4)
1
2

3. INSTALLATION

3.1 Ground Attachment

Ground attachment is to be carried out in accordance with the techni-
cal information in the instructions „Ground Sockets, Mounting Plates
and Base".

3.2 Electrical Installation

Electrical installation is to be carried out in accordance with the
instructions „Palazzo Style, Noblesse, Royal – Electrical Accessories"
®
or „Control Pz14".

3.3 Installation Standard

The following description relates to the standard design of the
PALAZZO Style or Noblesse (with ground socket M4).
®
Note: All loose screws are to be secured with Loctite 243. In the event of
a new assembly, clean the screws beforehand or use new screws.
3.3.1 Setting Up Sunshade (2 adults required)
1 2
4
3
Fig. 1
Notch on the
tipping side
• Mount top.
3 4
• Stick together electrical plug if
necessary.
3
• Check that the pole/support
tube/connecting screws fit
properly! If support tube is not
pre-mounted, insert and tighten
the screws in the sequence
S1, S2, S3 and S4.
• Dismantle lockable connecting
bolts (1) pole/support tube.
Fig. 2
(Fig. 2).
• Place sunshade upright, until
support tube disc (3) lies flat on
ground socket disc (4)
(Fig. 3).
2
1
3
4
Fig. 3