Bolt Base X4; Wrench; Bolt Cap X4; Tubing Adapter X2 - EVGA HADRON Bedienungsanleitung

Intel Socket 2011
STEP 1
Intel LGA 775/2011
Intel LGA 1155/1156/1366
AMD SOCKET AM2/AM2+/AM3
Component Name:
1. Tubing Adapter / Clamp (Option) 8. Thermal Paste
2. Bolt Base 9. Scraper
3. CPU Waterblock 10. AMD Locker
4. Bolt Cap 11. Angle Wrench
5. Washer 12. Hexagon
6. Backplate 13. Screws-B
7. Screws-A
8
▪ Please remove all supporters off the CPU before installing.
▪ Using the 4pcs Screws-A
on the bottom of M/B together.
Intel LGA 2011 Assembly
If there are no 4 holes on the Intel LGA 2011 CPU socket,
please following the installation of Intel LGA 2011 socket
assembly. Using the 4pcs screws to lock the 4 holes of the
Intel LGA 2011 CPU socket on the M/B entirely.
STEP 2
▪ Before applying thermal paste, clean the surface of the CPU, place sufficient amount of thermal
paste onto CPU.
8
▪ Using the scraper
▪ Remove protectie shield on the bottom before installing the CPU Water-block.
English English
7 4pcs bolt cap 4 and 4pcs washers
, evenly spread thermal paste onto CPU.
9
9
5 to install the backplate 6