Chapter 3: Parts Description; Chapter 4: Safety Notes; Chapter 5: Installing The Cpu Water Block - EVGA HADRON Bedienungsanleitung

Chapter 3: Parts Description

Component Name:
1. CPU water block backplate
2. CPU water block
3. Pump and reservoir
4. Adaptors (90° long / 90° short / 90° / 45° / straight)
5. Washer x4
6. Screws-A x4
7. Bolt Base x4
8. Angle wrench
9. Wrench
10. 24 pin short
11. Bolt Cap x4
12. Thermal Grease/Scraper
13. 4 pin to molex adapter
14. AMD bracket
15. Screws-B x4
16. Cooling Fluid
17. Funnel
18. Tubing Adapter x2
16
2
1
18
4
10
5
11
6
7
12
8
17
12
15
9
6

Chapter 4: Safety Notes

1. Read these instructions carefully before installing and running this product.
2. If you are not familiar with the water cooling system, we suggest you ask for help.
3. Please turn off the power of the computer before installing this product.
4. Please note all safety issues common with all electronics to avoid damages.
5. The product is suitable for home or office use only.
3
6. Only use included coolant.
7. Please place in open space, avoid direct sunlight and heat sources.
8. Please backup the data on the computer before installing.
9. All tubes must be locked tightly into the right position to avoid damages.
10. If there is problem with the water cooling system or the pump makes unusual noises, turn off
computer for a system check (see Trouble Shooting).
13 11. If leakage appears, shut down system for repair and check the system
(see Trouble Shooting).
12. Conduct regular checks on the water volume in the system.
13. Please place the coolant far away children.
14

Chapter 5: Installing the CPU Water Block

14
This system already comes prefitted for Intel Socket 1150/1156, if you wish to connect a different
CPU, please reference below instructions.
English English
7