Using The Grater Disc - Beko HBG5100W Bedienungsanleitung

Operation
3
4. Place the lockable cover (15)
onto the transparent middle cov-
er (11). Make sure that the tabs
on the lockable cover are fully
seated on the container.
5. Place the motor body (3) onto
the cover (15). Turn clockwise
until it is fully seated into its
place. Make sure that the motor
body is fully fitted to the cover.
6. Plug in the appliance.
7. Press and hold the operation
button (1).
8. Press and hold the turbo opera-
tion button (2) for accelerating.
9. When your work is done, re-
lease the operation button (1)
or turbo operation button (2)
and unplug the appliance.
10. To remove the motor body (3),
press the motor body locking
button (17) and take the mo-
tor body out by turning it anti-
clockwise.
11. To remove the lockable cover
(15), take out the cover by
pressing the locking tabs re-
lease button (16) at first and
then remove the transparent
middle cover.
14 / 153 EN
12. Before taking out the blended
food, remove the blending
blade (12) carefully.
3.7 Using the grater
disc
1. Hold the grating blade while it is
facing upwards and attach it to
the grater disc (9). (To remove
the grating blade from the disc,
push it slightly from the bottom).
2. Place the accessory carrier pin
(10) onto the fixed shaft in the
processor container and fit the
grater disc (9) on it. Then close
the transparent middle cover
(11) and place the lockable cover
(15) on it. You will hear a "click"
sound when the cover (15) is
fully seated.
3. Place the motor body (3) onto
the cover (15). Turn clockwise
until it is fully seated into its
place. Make sure that the motor
body is fully fitted to the cover.
4. Plug in the appliance.
5. Put your food into the feeding
chute (18) and grate it with the
help of the pusher (19). Never
use your fingers, forks, knives
etc. to push the food.
Grater Hand Blender / User Manual