Weighing A Sample - Adam Equipment ABK 8 Bedienungsanleitung

EN
• Press the [Z/T] key to tare the scale. The weight is deducted and
stored as the tare value leaving zero on the display. The "NET"
indicator will be ON and as a product is added only the net weight
of the product will be shown. The scale could be tared a second
time if another type of product was to be added to the first one.
Again only the weight that is added after taring will be displayed.
• When the container is removed a negative value will be shown. If
the scale was tared just before removing the container this value
is the gross weight which includes the container and the entire
product it contains. The "ZERO" indicator will be on to indicate
that the platform is back to the same condition as it was when
zero was last set.
• To delete a Tare value, press [Z/T] when the pan is empty.

WEIGHING A SAMPLE

6.3
To determine the weight of a sample, first tare the empty container if it is to
be used and then place the sample in the container. The display will show the
net weight of the sample and the unit of weight currently in use.
© Adam Equipment Company 2015 10 3116611621RevA1-Feb15