Precautions For Use; Listening To Radio - auna multimedia 10008985 Anschluss- Und Anwendungshinweise

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all other
connections have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the
unit for ventilation.
1. Connect the DC plug (25) to the DC in jack (23) of the unit then plug the AC/DC adaptor(24) to
the AC outlet.
2. When you first plug the unit into the mains, the unit will go into standby mode and the standby
LED indicator (11) will light up.
3. Connect the speaker wire to the speaker terminate (21) located on the back of unit.
4. Turn on the power (15), if the LCD display (1) is on with backlighting, it means the power supply
is normal. Now your system is ready to play the music.
1. Set unit in standby mode.
2. Press & hold the " Mem/Clk-adj " button (14), the LCD display (1) will show " 24hr " and flashing.
Press skip up
(12hr/24hr). Press the " Mem/Clk-adj " button (18) the first & second digit of " 00 " is flashing
on the LCD display(1). Press skip up
" Mem/Clk-adj " button (18) to store the correct hour.
3. The third & fourth digit of " 00 " is flashing, press the skip up
set the correct minutes. Then press " Mem/Clk-adj " button (18) to store the correct minute.

The clock setting mode will automatically quit if no button is being pressed in a period
of about 5 seconds after pressing the " Mem/Clk-adj " button.

The pre-set time will be re-set completely if dis-connecting the main power supply. You
are recommended to switch the system into standby mode for convenience usage.
Manual tuning
1. Press Function button (4) to select " Tuner " mode.
2. Tune to the required station by pressing the tune " up " or " down " button (3).
3. Adjust Volume up/down button (5) to the desired volume level.
Auto tuning
1. Press Function button (4) to select " Tuner " mode.
2. Tune to the required station by pressing the tune " up " or " down " button (3) for 1-2 seconds
and then release.
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Adjust volume up/down button (5) to the desired volume level.
Preset stations
You can store up to 20 radio stations in the memory

PRECAUTIONS FOR USE

CONNECTION
SETTNG THE CLOCK
or skip down button (3.) to select the appropriate area hour format
or skip down

LISTENING TO RADIO

button (3) to set the correct hour. Press
or skip down button (3) to
12