Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1) LCD display
2) Skip down
3) Stop
4) EQ
5) Function / Mode
6) On / Standby
7) Dimmer switch
8) Volume
9) USB socket
10) SD card slot
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio
tuner nearby, switch this unit off while operating other radio devices
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the main voltage and before all other connec-
tions have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the
unit for ventilation.
1. Connect the AC cord (28) of the unit to the AC outlet.
2. When you first plug the unit into the mains, the unit will go into standby mode LCD display will
show 0:00 with dim backlight.
3. Turn on the unit by On/Standby button (6), if the LCD display (1) with brighter backlighting, it
means the power supply is normal. Now your system is ready to play the music.
LOCATIONS OF CONTROLS
11) CD tray
12) Dial scale
13) Play / Pause
14) Skip / tune up
15) Folder up
16) Memory / clock-adjust button
17) Play mode
18) CD tray open / close
19) Mute switch
20) Tuning knob
PRECAUTIONS FOR USE
CONNECTION
21) 3.5mm headphone jack
22) 3.5mm aux-in jack
23) Remote sensor
24) BT indicator
25) FM stereo indication
26) Line out socket
27) FM wire antenna
28) AC socket
13
Werbung
Inhaltsverzeichnis
