More Features - auna multimedia 10008985 Anschluss- Und Anwendungshinweise

Remark
- The system can detect and read the file under MP3 format only at USB/SD mode but not other
music file format.
- If connect the system to MP3 player via the USB socket, due to variances in MP3
encoding format, some MP3 player may not be able to play via the USB socket. This is
not a malfunction of the system.
- USB port does not support connection with USB extension cable and is not designed for
communication with computer directly
Removing of USB / memory card
To remove the USB / memory card, turn off the power or switch the function mode to either CD, iPod,
aux or tuner first. For USB port – un-plug it by pulling out the USB socket directly, for memory card – pull
out the SD/MMC card straightly without bending.
BLUETOOTH CONNECTING AND PLAYBACK
1. Select the Main Function selector (4) to " BLUETOOTH(BT) " mode.
2. The Bluetooth LED indicator (12) will flashing, it means the Bluetooth in non connection /
searching mode.
3. Switch on the Bluetooth feature of your Bluetooth device(such as mobile phone) and select
"BKS01" Bluetooth equipment to connecting.
4. Once the connecting was finish and connect successfully, the Bluetooth LED (12) will change to
light up.
5. Start to playback your Bluetooth device and enjoy the music by the main unit.
A. Sleep function
1. Press " Sleep " button "SLP-90 " will shown on the LCD display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >....10 minutes
respectively and sleep icon "
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press " Sleep " button until "SLP-off' displayed and the "
disappear on LCD display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB, SD mode
respectively.
Press and hold the " Alarm " button to enter the alarm setting mode, the first two digits of clock will flas-
hing with alarm icon "
button again to confirm. Then press Skip up
" button to confirm the alarm time, press Skip up
press " Alarm " button to confirm. Then press Volume up/down button to adjust the wake up volume
level. Press the " Alarm " button to complete the alarm setting.
Remark:-
• If there is no music source being detected (such as USB or CD) when the preset time is reached,
system will default to " Tuner " function for wake up mode automatically. The system will preset
at the latest radio frequency being listened before switching off

MORE FEATURES

" will indicate on LCD (1).
". Press Skip up / down
/ down
" button to set the hour & then press " Alarm "
" button to set the minutes & press " Alarm
/ down " button to select wake up mode &
" indicator
16