Facom BCS.12-15 Bedienungsanleitung Seite 8

EN
Precautions
The electric facility where the FACOM BCS.12-15 "Battery Station" is to be connected will comply with currently enforced regulations.
•
The FACOM BCS.12-15 "Battery Station" will be used only by skilled and trained personnel.
•
Use personal protection equipment and apply currently enforced working rules.
•
Always apply the vehicle manufacturer's instructions. Connect the FACOM BCS.12-15 "Battery Station" only to the 12V circuit terminals
•
of a 12V vehicle.
Only use the FACOM BCS.12-15 "Battery Station" for the purpose it was designed for.
•
Never disassemble the FACOM BCS.12-15 "Battery Station". All maintenance operations will be performed by FACOM's after-sales
•
service.
Read the instructions carefully before use.
•
General description of the BCS.12-15
1 Charge controller
2 Power command
11 Error indicator
12 Charge indicator
13 Internal battery charge
14 Charge of the external "wet" battery
15 Charge of the "WET, VLRA, AGM GEL" external battery
16 Internal charge level check
21 12V cigarette lighter output
22 12V cigarette lighter output 20A protection
23 Polarity reversion sound and visual alarm
24 Starter mode power switch
25 Position: CHARGER ON / BOOSTER OFF
26 Position: CHARGER OFF / BOOSTER ON
Start-up
Before using your FACOM BCS.12-15, install the internal battery. Use only a 12V "LEAD ACID" automotive starting battery matching the
following specifications:
The battery must be of the type: AGM, VLRA or GEL.
•
Do not use non sealed batteries allowing to top up electrolytic liquid.
•
Better performance is obtained with AGM batteries for "Start and Stop" vehicles.
•
Maximum capacity 85 Ah.
•
Maximum weight 24 KG.
•
NU-BCS.12-15_0216.indd 10
31 Clamp fastening stud
32 Cable exit / winding hook
33 Power supply plug 220-240V 50-60HZ
34 Cooling outlet
35 Power supply cable and cigarette lighter extension storage hook
36 Internal battery cover
37 Internal battery location
38 Power fuse
39 Battery fastening strap
10
2/15/2016 9:00:56 AM