Additional Vibration Information; Noise And Vibration Data - Chicago Pneumatic CP 1230 Sicherheits- Und Betriebsanleitung

Safety and operating instructions

Additional vibration information

This information is provided to assist in making rough estimates of the vibration value in the workplace.
The vibration emission varies greatly with task and operator technique. The declared vibration value relates
to the main handle(s) and much higher vibration levels may occur at other hand positions. We believe that
normal intended use of the tool will usually produce vibration emissions in the range of C
(vibration total values, as defined in ISO 5349-1:2001) depending on the details of the task, but emissions
outside this range may occur for some applications.
2
A figure of D m ⁄ and F m ⁄
s
the likely average exposures of users performing a wide range of tasks within the intended use of the tool. We
point out that application of the tool to a sole specialist task may produce a different average emission and in
such cases we strongly recommend a specific evaluation of the vibration emission.

Noise and vibration data

Sound pressure
Declared values
ISO 11203
Lp
r=1m dB(A) rel
Type 20µPa
CP 1210 S 92
CP 1210 SVR 92
CP 1230 S 95
CP 1230 SVR 96
CP 1240 S 98
CP 1240 SVR 99
22
www.CrowderSupply.com • Toll Free: 888-883-5144
2
is probably a useful average emission value when, for example, roughly estimating
s
Noise
Sound power
2000/14/EC
Lw
guaranteed
dB(A) rel 1pW
105
105
108
108
111
111
Vibration
Three axes values
Declared values Additional vibration information
ISO 20643 Concrete
A B C
2 2
m/s m/s m/s
value spreads range
14.6 1.9 -
5.3 1.0 3.6–3.7
18.2 2.3 -
7.4 1.2 6.7–7.4
15.3 2.0 -
7.8 1.3 8.6–11.7
9800 0608 90d | Original instructions
CP 1210, CP 1230, CP 1240
2
m ⁄ and E m
s
Asphalt
D E
2 2 2
m/s m/s m/s
average range average
- -
3.7 3.8–3.9
- -
7.1 5.8–6.7
- -
10.3 6.2–7.2
2
⁄
s
F
2
-
3.9
-
6.3
-
6.7