Configuring The Operating System And Computer (Mac Os X) - Hama 00062764 V2 Bedienungsanleitung

After the operating system has loaded completely and the desktop is complete, insert the enclosed driver
CD-ROM in your drive. An icon with the CD-ROM then appears on your desktop. Double-click the icon and
select the MAC driver directory in the Finder window. This directory contains the DMG file required for
installation. Double click the DMG file to activate the image.
After you activate the image, select the correct directory for your installed MAC OS X Version and then
double click the corresponding PKG file. Installation is now started.
Select your hard drive on which you want to install the driver and the configuration program. You must then
restart the system.
6. Configuring the operating system and computer on MAC OS X
After you have installed the driver, you must configure the network environment in accordance with the
new situation. To do so, proceed as follows.
Click the Apple symbol in the upper menu bar and select
the Environment menu item.
Select the "Network" setting menu item. The following
window opens. Click OK to confirm the message.
Note: If the message shown above is not displayed, the Hama WLAN USB Stick was not correctly identified
by your PowerMac. Ensure that the stick is correctly connected to a USB 2.0 port and that the
USB 2.0 interface card was correctly installed in your system.
After the Hama WLAN USB Stick has been properly
detected, the following window opens.
Select the New environment... option under Environment.
Name the new environment e.g. WLAN and click the
OK button.
11