Driver & Software Installation - Conceptronic CTVDIGRCU Benutzerhandbuch

ENGLISH
When the USB DVB-T adapter is connected to your computer, you can install the drivers and software.
A. Insert the CD-ROM in your CD-ROM Drive. The Autorun should appear automatically. If the Autorun
menu does not appear, navigate to "My Computer" and double-click on the CD-ROM drive to start
the Autorun menu.
You need to install 3 packages in order to use the USB DVB-T adapter: The CTVDIGRCU drivers, the Remote
Control drivers and the Arcsoft TotalMedia software.
B. Select the option "Install CTVDIGRCU Drivers" from the Autorun Menu. The Driver Setup Wizard will
appear.
C. Click "Start" to install the drivers on your computer.
D. When the installation is finished, click "OK" to close the Driver Setup Wizard.
You can now proceed with installing the Remote Control drivers.
E. Select the option "Install Remote Control Drivers" from the Autorun Menu. The Setup Wizard will
appear.
F. Click "Next" to install the remote control drivers on your computer.
When the installation is finished, the Setup Wizard will be closed automatically.
3. Driver & Software installation
11