Conceptronic CHD3SATA Schnellstartanleitung Seite 3

ENGLISH
Conceptronic CHD3FWU/CHD3SATA
Quick Installation Guide
Congratulations on the purchase of your
Conceptronic Firewire USB or Serial ATA Harddiskbox.
The enclosed Hardware Installation Guide gives you a step-by-step explanation of
how to install the Conceptronic CHD3FWU & CHD3SATA.
When problems occur, we advise you to go to our support-site (go to
www.conceptronic.net and click 'Support'. Here you will find the Frequently Asked
Questions Database.
When you have other questions about your product and you cannot find it at our
website, then contact us by e-mail: support@conceptronic.net
For more information about Conceptronic products, please visit the Conceptronic
Web Site: www.conceptronic.net
The Software installation as described below, may be slightly different from the
installation on your computer. This depends on the Windows version you are using.
1. Hardware Installation CHD3FWU / CHD3SATA
1.1 Cable connections
Insert the plug of the USB or Firewire cable (CHD3FWU) or the SATA cable (CHD3SATA) into
the connector of the drive. Press firmly until the Interface Connector is seated correctly.
For Windows 98SE only: Do not connect the USB cable into the computer. Install first the pre-
install program
When using the firewire connection of the CHD3FWU or the SATA connection of the
CHD3SATA, then you can skip the software installation.
3