Inhaltsverzeichnis
Werbung
8.
CARATTERISTICHE TECNICHE
B500/12, B500/24, B500/32 MICROPHONE STANDS WITH MB30-GN, MB60-GN
PRESSIONE SONORA MASSIMA
MAXIMUM SOUND PRESSURE
RISPOSTA IN FREQUENZA
FREQUENCY RESPONSE
DISTORSIONE ARMONICA TOTALE (misurata a 100 dB SPL)
TOTAL HARMONIC DISTORTION (measured at 100 dB SPL)
MASSIMO LIVELLO DI USCITA (misurato a 100 dB SPL)
MAXIMUM OUTPUT LEVEL (measured at 100 dB SPL)
IMPEDENZA DI USCITA NOMINALE
RATED OUTPUT IMPEDANCE
MASSIMO LIVELLO DI USCITA (misurato a 100 dB SPL)
MAXIMUM OUTPUT LEVEL (measured at 100 dB SPL)
ALIMENTAZIONE PREAMPLIFICATORE
PRE-AMPLIFIER POWER SUPPLY
ALIMENTAZIONE CIRCUITO DI SELEZIONE
SELECTION CIRCUIT POWER SUPPLY
ASSORBIMENTO RELÈ RL103
RL103 ABSORPTION RELAY
DATI DELLO SCAMBIO IN CORRENTE CONTINUA
RELÈ RL103 (MAX)
DATA ON DIRECT-CURRENT SWITCHING OF RELAY RL103 (MAX)
DATI DELLO SCAMBIO IN CORRENTE ALTERNATA
RELÈ RL103 (MAX)
DATA ON ALTERNATING-CURRENT SWITCHING
OF RELAY RL103 (MAX)
DATI DELLO SCAMBIO (MAX) TASTI SELEZIONE ZONE
DATA REFERRED TO THE SWITCHING (MAX)
OF THE ZONE-SELECTION KEYS
ASSORBIMENTO MAX (RELÈ DI SELEZIONE ZONE ESCLUSI)
MAXIMUM ABSORPTION
(RELAY FOR SELECTING ZONES EXCLUDED)
BASI MICROFONICHE B500/12, B500/24, B500/32 CON MB30-GN, MB60-GN
B500 SERIES
8.
130 dB
250 ÷10000 Hz
0,6 %
3,15 Volt
1 kΩ
3,15 Volt
12 V
110 mA MAX
12 V
50 mA (12 V)
150 V / 2 A / 30 W
125 V / 2 A / 60 VA
100 mA
500 mA
TECHNICAL SPECIFICATIONS
Z load = 10 kΩ
f = 1 kHz
THD ≤ 10%
V out = 250 mV
Z load = 10 kΩ
Distanza / Distance 0,5 m
V out = 250 mV
Z load = 10 kΩ
f = 1 kHz
Z load = 10 kΩ
f = 1 kHz
THD ≤ 5%
Z load = 10 kΩ
f=1 kHz
THD ≤ 5%
± 20%
± 20%
9
Werbung
Inhaltsverzeichnis
