Herunterladen Inhalt Inhalt Diese Seite drucken

Mounting Location - Velleman HAA52 Bedienungsanleitung

Mini-pir-melder
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the HAA52! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
The HAA52 is a mini PIR intruder detector. It is designed to provide a reliable low-cost solution for general purpose
residential and commercial installations. The HAA52 employs a dual-element, pyroelectric sensor designed with
pulse-count circuitry, RFI interference filter and vertical angle adjustment for the detection pattern. It offers
substantial immunity to false alarms and can be installed at any height.
2. Coverage Pattern
M
9
6
3
0
0
3
6
M
3
0
0
3
6

3. Mounting Location

∗ The detector can be surface or corner mounted. Always mount the unit on a sturdy surface.
∗ The detector should be mounted indoors, in areas that do not have openings constantly exposed to the outside
environment.
∗ Select the mounting location so that the expected movement of an intruder will cross the detection beam.
∗ Do not locate the detector where hot or cold moving air will blow directly onto the unit.
∗ Avoid aiming the detector towards heating or air conditioning vents or ducts, exterior metal walls, exterior
windows or curtains covering windows, refrigerator or freezer grills or other surfaces that may change
temperature rapidly.
∗ Avoid putting large objects in front of the detector which will cause significant changes in the area or volume
protected.
HAA52
HAA52 – MINI PIR INTRUDER DETECTOR
9
12
M
9
12
M
3
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis