Step 6: Optimum Pointing & Finding The Signal (With Attenuation Thin Pad) - SELFSAT H21D Bedienungsanleitung

Step 6: Optimum Pointing & Finding the Signal (with Attenuation Thin Pad)
Use of Attenuation Thin Pad simulates bad weather conditions causing a signal loss and aids antenna
positioning to receive an optimum signal in all weather conditions.
Optimum pointing and finding to gain the best signal is only possible after passing through step 5.
Please affix Attenuation Thin Pad back onto the face of antenna cover and you may start repeating to
make adjustment of Skew angle, Azimuth, and Elevation as done the same in step 5, again to achieve
the maximum and optimum signal level.
Once completed, remove the Attenuation Thin Pad (keep pad in a safe place to use in future for
portable use) ensure that all the screws are well tightened to avoid the antenna moving position.
Note
During heavy cloud coverage or rainfall, the reception of signal level tends to weaken and in
some cases the signal level will not be possible by the use of Attenuation Thin Pad. So during
bad weather, you are recommended to skip step 6 for a use of Attenuation Thin Pad.
Attenuation Pad
SELFSAT-H21D
Keep this Pad for the First installation and Pointing
www.self-sat.com
14