Assembly - Silvercrest SEKU 2000 A1 Bedienungsanleitung

Assembly

GB
CY
Step 1
Screw 5 single locking pins
♦
Insert 5 adapter sleeves
♦
line up the adaptor sleeves
side panel
Then, bring the front panel
♦
enter the holes on the left edge of the side panel
When done, screw all 5 adapter sleeves
♦
clamped into the adapter sleeves and the panels are seated fi rmly together and at right angles.
Step 2
Screw 5 single locking pins
♦
Insert 5 adapter sleeves
♦
line up the adaptor sleeves
side panel
10
with a screwdriver into the prepared holes on the left front panel
D
into the 5 large holes of the left side panel
E
so that the arrow on the adaptor sleeves points to the outer edge of the
E
.
D
2
and side panel
2
with a screwdriver into the prepared holes on the right front panel
D
into the 5 large holes of the right side panel
E
so that the arrow on the adaptor sleeves points to the outer edge of the
E
.
8
8
E
E
together at right angles, so that the locking pins
.
to the right with the screwdriver until the locking pins are
E
D
4
Assembly
.
2
. Thereby, with the screwdriver
D
.
4
8
. Thereby, with the screwdriver
SEKU 2000 A1