Positioning - SPM NINO Betriebs- Und Wartungsanleitung

6. POSITIONING

FOR MAINTENANCE WORKER ONLY
The installation and subsequent servicing
operations must be carried out by skilled
members who have been trained to use the
device and in
regulations in force.
a) Remove the packing (fig.1) preserve it in
order to reuse for winter storage and make sure
the machine is in perfect condition.
!Caution!
All the parts of the packaging must be kept
beyond the range of children, as they might
represent a potential safety/health risk.
b) Rest the machine on a sturdy, horizontal
surface making sure it is well ventilated by
leaving a gap of 20 cm around it and do not
install it near heat
recommend you
temperature between 24 and 30°C.
c) Check that the power mains voltage meets
the specifications
identification plate and that the output available
meets the device's power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR FURTHER PRECAUTIONS, READ THE
SECTION "CONNECTION TO THE POWER SUPPLY
MAINS" CAREFULLY.
d) The installation must be carried out in
accordance with the manufacturer's instructions.
Failure to comply with the positioning and
installation instructions
machine's operation.
Important
You are legally required to provide a suitable
grounding system for the equipment.
Before carrying out any cleaning and/or special
maintenance on the device, make sure it is
disconnected from the mains by unplugging it.
In the event of a breakdown or malfunctioning,
switch off the device and remove the plug.
Data di emissione: January, 2016
compliance with
sources (fig.2);
to maintain a
on the equipment
may impair
the
we
room
the
Revisione: 1
Fig. 1
Fig. 2
Pag. : 25/63