Intended Use; Individual Parts - Conrad Electronic HVA-9050R Bedienungsanleitung

Intended use

The Compo HVA-9050R amplifier serves to amplify low level audio signals in dome-
stic audio systems and is wired between the source of the signal to be amplified and
the loudspeakers.
The amplifier is designed to drive loudspeakers with a minimum impedance of 4
Ohms per channel. The amplifier itself must only be driven from a low level audio
source.
This product is only approved for connection to 230 V~/50 Hz AC voltage via sockets
with earthing contact.
Use is permitted only in closed rooms; do not use outdoors. Avoid all contact with
moisture, e.g. in bathrooms.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
No part of the product may be altered or modified, nor may the housing be opened.
The safety instructions must be observed at all times.

Individual parts

(see fold-out page)
(1) Mains switch
(2) POWER button
(3) Infrared receiver
(4) Headphone socket
(5) SPEAKERS buttons
(6) METER button
(7) Bass/treble controls
(8) Input selection buttons
20
(9) BALANCE control
(10) VOLUME control
(11) Earth terminal
(12) Cinch connections
(13) Loudspeaker output terminals
(14) Mains connection
(15) Fuse holder
(16) MUTE button