Miele CarCare Gebrauchsanweisung Seite 61

Maintenance of the Hand-held
Turbobrush
,
Always turn off and unplug the
vacuum cleaner before cleaning or
performing maintenance work on the
Hand-held Turbobrush.
Removing threads and hairs
^ With a pair of scissors, cut any thre-
ads or hairs that have become tan-
gled on the roller brush. To guide the
scissors, follow the guide track in the
roller.
^ Then turn on the vacuum cleaner to
vacuum up the bits.
For stubborn dirt or blockages inside
the Hand-held Turbobrush, the cover
can be opened. Any large particles in-
side it can then be easily removed.
^ Press the release button and remove
the service flap opposite it.
^ Remove any debris from the inside of
the casing and from the brush roller.
^ Replace the service flap.
Changing the thread catcher
Replace the thread catcher of the
Hand-held Turbobrush when the pile is
worn.
^ Use a knife or similar object to remo-
ve the thread catcher pads from the
slots.
^ Press the new thread catcher into the
slots.
en (US/CA)
61