Herunterladen Inhalt Inhalt Diese Seite drucken

Functions - AERMEC KTL M Bedienungs- Und Installationsanleitung

Fernbedienungssatz für entilatorkonvektoren
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39

FUNCTIONS

SETTING THE SWITCH-ON/SWITCH-OFF TIMER
• Press the
button to activate timer functions for programmed switch-on/
TIMER
switch-off.
Every time the
button is pressed it changes the timer's working mode.
TIMER
• The timer has three working modes (displayed on the display):
TIMER ON :
With this mode you select the switch-on time of the fan coil unit.
The timer's ON icon fl ashes on the display.
• Press the
/
buttons to adjust the time.
• Press the
button to activate your settings.
SET
TIMER OFF :
With this mode you select the switch-off time of the fan coil unit. The timer's OFF
icon fl ashes on the display.
• Press the
/
buttons to adjust the time.
• Press the
button to activate your settings.
SET
TIMER ON & OFF :
Use this mode to select the switch-on/switch-off times for the fan coil unit.
• Press the
key to select programmed switch-on switch-off until the two ON
TIMER
and OFF icons appear on the display
The ON icon fl ashes.
• Press the
/
buttons to adjust the switch-on time.
• Press the
button again.
TIMER
The OFF icon fl ashes.
• Press the
/
buttons to adjust the switch-off time.
• Press the
button to activate your selection.
SET
The TIMER functions remain active over the following days, press the
key until the settings disappear from the display to cancel them.
TIMER
MODE
CLOCK
STRONG
TIMER
SLEEP
SET
ROOM
I FEEL
1
EMERGENCY SWITCH-ON/SWITCH-OFF FUNCTION
•Press the
button on the receiver to switch-on/switch-off the fan coil unit only
in Automatic mode (temperature set at 22°C and automatic ventilation speed).
This key switches the fan coil unit on or off when the remote control is not avai-
lable (e.g. fl at batteries).
24
RESET
Press the
button to reset all the settings.
2
MODE
2
CLOCK
STRONG
TIMER
1
SLEEP
SET
3
ROOM
I FEEL
1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ktl p

Inhaltsverzeichnis