Specifications; Power Supply Cord - Denon PMA-SA1 Bedienungsanleitung

6 SPECIFICATIONS

POWER AMPLIFIER SECTION
•
Rated Output Power:
Total Harmonic Distortion:
Output terminals:
• PRE AMPLIFIER SECTION
PHONO EQUALIZER
Rated Output:
(REC OUT terminal)
Input Sensitivity/Input Impedance:
RIAA Deviation:
• OVERALL CHARACTERISTICS
SN Ratio (IHF A Network):
• OTHERS
Power Supply:
Power Consumption:
Dimensions:
Mass:
Maximum dimensions include controls, terminals, and covers.
(W) = width, (H) = height,
• For improvement purposes, specifications and functions are subject to change without advanced notice.
Both channel driven (CD-1 → SP OUT)
50 W + 50 W (8 Ω/ohms load, 20 Hz ~ 20 kHz with 0.07 % T.H.D.)
100 W + 100 W (4 Ω/ohms load, 1 kHz with 0.7 % T.H.D.)
0.007 % (–3 dB at rated output) 8 Ω/ohms load, 1 kHz
Speaker load 4 ~ 16 Ω/ohms
150 mV
PHONO (MM) :2.5 mV/47 kΩ/kohms
CD-1, CD-2, TUNER,
DVD/AUX,
TAPE-1/CD-R, 105 mV/47 kΩ/kohms
TAPE-2/MD
BALANCED :105 mV/100 kΩ/kohms
PHONO :20 Hz ~ 20 kHz ±0.3 dB
PHONO (MM) :88 dB (input terminals short-circuited, 5 mV input signal)
CD-1, CD-2, TUNER,
DVD/AUX,
TAPE-1/CD-R, 105 dB (input terminals short-circuited)
TAPE-2/MD,
BALANCED
AC 230 V, 50 Hz
230 W (IEC)
434 (W) x 181 (H) x 508 (D) mm (including feet, controls and terminals)
30.0 kg
(D) = depth
ENGLISH
13