Fermax KIT WAY Installations- Und Benutzerhandbuch Seite 36

14. Setup / Cables Requirements
14.1 ID Card Registration
Introduction:
• Up to 320 user cards can be registered by the door station.
• Easy management with LED status and sound hints.
• There are two master cards, one
CARD DELETE
are invalid automatically.
• Card reading distance is from 3 to 5 cm.
• The master cards are necessary when you add or delete user cards. Please
keep it well for future use.
Authorize master cards:
By default,there are two master cards marked
you should know that the master card can be authorized by users at any time.That means
any two user cards can be authorized to master cards,When registered new master cards,
the old master cards are invalid automatically.
Power off .
Press and hold the
.
Button
Power on.
The color of
background indicator
beep+
(blue)
Notice: it will return to standby mode if no operation within 10s.Or press Call Button to
exit the state of.
-15-
MASTER CARD ADD
card, When registered new master cards, the old master cards
Press and hold
again the
Call
seconds.
The color of
background indicator
(blue)
Show the second card to
ID card window, it will
be set to
DELETE
The color of
background indicator
(blue)
card and one
MASTER CARD ADD
3
Call Button
beep+,beep
MASTER CARD
card.
beep+
MASTER
and
MASTER CARD DELETE
Press and hold the
3 seconds.(At this time press
the will to start the
Call Button
aging function)
The color of
background indicator
beep+,beep
(white)
Show the fi rst card to
ID card window, it will
be set to
MASTER CARD
card.
ADD
The color of
background indicator
beep+
(yellow)
,but
Call Button