KeyMatic KM 300 IQ+ Bedienungsanleitung Seite 59

• Now the initialisation drive starts moving towards „Locked". This procedure is
only carried out once in comparison to the unlocked initialisation drive.
In this case you can also make adjustments in 90° steps i.e. when only "1x
Locking" is requested when locking. This saves on battery capacity and
facilitates faster locking and unlocking.
Setting „Lock" position:
• Press "Unlock" button briefly, the drive moves 90° respectively towards "Unlock"
(this movement can be repeated a numerous amount of times).
• Press „Lock" button briefly; the drive moves 90° respectively towards „Lock"
(this movement can be repeated a numerous amount of times)
• Press "Setup" key. The drive begins to the programmed setting "Unlocked"
"4" appears in the display signifying menu item 4 ("hold time for door catch"
setting). The unlocking symbol flashes.
Now you can set the hold time of the door catch for the "Door Opener" function.
Please note that the battery consumption increases with lengthened hold times.
Hold time setting
• Briefly press "Unlock" button:
Lengthened hold time (approx. 2.5 seconds)
• Briefly press "Lock" button:
Short hold time
59