KeyMatic KM 300 IQ+ Bedienungsanleitung Seite 49

1 Screw for fastening the cylinder lock in the lock
2 Cylinder lock
3 Moveable bolt toe (it moves the locking bar in the lock of the door)
4 Inner fitting of door
5 Door leaf (e.g. out of wood, aluminium or plastic)
6 Outer fitting of door
7 Rosette
(depending on the outer door fitting, possible not existent or integrated on the inside in the door
fitting)
A Internal dimension
B External dimension
C Internal dimension + additional projection (8mm to 15mm, ideal: 10mm)
• To measure the cylinder lock exactly it is advantageous to dismount it (as described ion the
previous page).
• Measure, starting from the bore, (1) the inside (A) and the outside (B) of the cylinder lock.
• To obtain the dimensions of the cylinder lock to be bought new, add the stated 8 mm to 15 mm to
the inside measurement (A) as long as the cylinder lock was exactly flush with the internal door
fitting).
If, for example, your cylinder lock has the dimensions 40mm/40mm, you require a cylinder lock with
the standard dimensions 50mm/40mm. The cylinder lock will then project after being replaces
10mm which is ideal for mounting the door lock actuator.
5
4
3
2
1
A
C
6
7
B
49