Enabling/Disabling Usb 2.0 Data Transmission - G&D DP1.2-MUX4-USB Installation Und Bedienung

Enabling/Disabling USB 2.0 data transmission

The front panle of the device provides two USB 2.0 interfaces to operate any USB
device. The connected USB devices are provided to the active computer.
You can use the setup menu to disable USB 2.0 data transmission. Any USB
devices connected to the USB 2.0 interfaces are not visible to the active computer.
NOTE:
USB data transmission can be enabled or disabled in the setup menu only.
How to enable or disable USB 2.0 data transmissions:
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
.
Enter
3. Press the Space
boards:
 USB 2.0 data transmission enabled (default)
enabled
 USB 2.0 data transmission disabled
disabled
4. Press the key to save your settings.
S
or Arrow keys to select the
key (repeatedly) to choose between the following key-
Configuration
USB 2.0 Function entry and press
G&D DP1.2-MUX4-USB · 33