Information For Qualified Electricians; Installation And Electrical Connection - Berker MT 701 CT Bedienungsanleitung

MT 701 CT
5. Information for qualified electricians
DANGER
Electric shock in case of accidental contact with live parts. Electric shocks
may be fatal.
Always clear power cables and cover active parts in the surroundings be-
fore working on the device.

5.1 Installation and electrical connection

Installing and connecting the device
Figure 3, bottom side
(7) Mains voltage terminal
(8) Bus connection
(9) Programming LED
(10) Programming key
(11) Ext. terminal for future upgrades, e.g. membrane keypad
(12) Reset key
(13) Reset LED
(14) USB Terminal
Installation in flush-mounting box (figure 4, 17)
Programming key and LED are accessible only from the bottom of the device. If possi-
ble, load the physical address into the device before the final installation (startup).
GB
31