Berker MT 701 CT Bedienungsanleitung Seite 26

GB
Changing light scenes
Light scene functions must have been created during programming of the device.
 Open the Light scene page.
 Select the desired light scene.
The selected light scene is highlighted.
 Press (<1 sec) the Call memory key briefly in order to call up the light scene.
 Change the name of the light scene: Press the Change text key and change the
name using the keyboard. Complete the entry by pressing Cancel or accept by
pressing Save.
 Press the Change scene key.
The selected scene will be called up and the corresponding values will be adjusted.
The lighting fixtures, blinds etc. available for the light scenes will be displayed together
with the current values.
 Enter values for the desired devices with the function keys, e.g. On, Off, 70%. Specify
Unch. – unchanged – for those devices that are not part of the light scene and that
are not to be changed.
 Complete the entry and accept the settings: Press Save Back.
 Complete the entry and do not accept the settings: Press Cancel back.
 Quit the Light scenes page: Press Back.
It is also possible to save a scene by first adjusting the scene manually. After that,
highlight the desired scene on the Light scenes page and press Call memory for
> 5 sec. In this case, the device reads and saves the status of all devices included
in the scene that are not declared as Unch. – unchanged.
Password protection
The operation of the device can completely or partially be protected against unauthor-
ised use. For this purpose, the device can handle up to four five digit passwords which
are hierarchically arranged in levels. If the device requests a password, the password
for the requested level has to be entered.
The default settings for the passwords are 11111, 22222, 33333, 44444.
If one or several passwords got lost, it is possible to reconstruct them. Please contact
a qualified KNX electrician.
26
MT 701 CT