Berker MT 701 CT Bedienungsanleitung Seite 28

GB
Adjusting basic brightness
The screen will switch into the energy saving basic brightness after several minutes
of nonuse.
 Open the Service page.
 Press Display settings.
 Press Brightness settings.
 Select basic brightness: Bright, Dim or Off.
The new setting will be visible as soon as the device switches back into the basic
brightness
Setting the date
 Open the Service page.
 Open System settings.
 Select Date.
 Enter the current date. Sequence: DD.MM.YYYY.
 Accept the entry by pressing Save. Invalid entries will not be accepted.
Setting the time of day
 Open the Service page.
 Open System settings.
 Select Time of day.
 Enter the current time of day. Sequence: HH:MM.
Enter the time of day in the 24 hour mode.
 Accept the entry by pressing Save. Invalid entries will not be accepted.
Setting the day of the week
 Open the Service page.
 Open System settings.
 Select Day of the week, select the current day of the week Accept the entry by
pressing Save.
Viewing the message list
 Open the Service page
 Open System settings
 Select message list.
The device will display the current fault messages.
28
MT 701 CT