Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Montagehinweise

Assembly instructions

Istruzioni di montaggio
Instructions de montage
Instrucciones de montaje
General and transport information
recommend that you use a carrying strap to transport the solar collector. You must not lift the solar collector by its
connections or screw threads. Do not jolt the collector or allow parts of it to be affected by mechanical factors. This is
Structural engineering aspects
load-bearing capacity of the roof or substructure must be checked in accordance with local and regional stipulations at
ty of the screw connections for attaching the panel mounting apparatus. The onsite checking of the system (collectors
might result in higher stresses at the site in question must be investigated.
Information regarding sloping roofs:
mum recommended value require (in relation to the cladding) additional measures to be carried out by the customer
in order to protect against the penetration of water as a result of wind force and driving snow. This might include sub-
use of snow guards (or the peculiarities of the installation site) must not be able to reach the panels. Snow catchers
must be installed 0.5 m above the top of the panels to ensure that the panels themselves do not act as snow arres-
above the roof ridge. Panels must not be installed below a height transition so that it is not possible for excess loads
Lightning protection/building potential equalisation
must be observed. A safety gap of at least 1 m from any adjacent object that may be conductive must be left. In the
Connections
counter wrench in order to prevent the absorber from being damaged.
Collector inclination/general information
The collector is suitable for an inclination of between 15º and 75º. The collector connections and venting openings
must be protected so that water and contamination such as dust cannot enter them.
Warranty
Guarantee claims are only valid if the system has been used in conjunction with the supplier's original frost protection
for any claim to be valid.
9
EN

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rka 2500 ss20

Inhaltsverzeichnis