Unable To Pair The Acoustimass Wireless Bass Module With The Console; Checking For Sound - Bose LIFESTYLE 650 Bedienungsanleitung

5. Place the three IR beads into the cabinet housing your device or directly in front of
the device itself.
6. Test the responsiveness of your remote. If problems still exist, reposition the IR
beads and test again.
Unable to pair the Acoustimass
bass module with the console
If you are unable to pair the bass module with the console, you can also connect the
module to the soundbar using a 3.5 mm stereo cable (not provided).
Use this method only if you are having issues wirelessly connecting your bass module to
your console.
Note: If you don't have a 3.5 mm stereo cable (commonly used for headphones and
mobile devices), contact Bose® customer service to receive this part.
Refer to the contact sheet in box
1. Connect one end of a 3.5 mm stereo cable to the ACOUSTIMASS IN connector on
the back of the bass module.
2. Connect the other end of the cable to the ACOUSTIMASS connector on the back of
your console.
3. Turn on your system and check for sound.

Checking for sound

1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
• Power on this source.
• If your secondary source is connected to your TV, select the appropriate TV input.
3. Power on your console.
You should hear sound coming from the bass module.
Note: If you do not hear sound from the bass module, see "Troubleshooting" on
page 30.
T R O U B L E S H O O T I N G
wireless
®
.
E N G L I S H - 3 3