Quax INDIGO 54 03 55xx-3D Bauanleitung Seite 39

INDIGO
54 03 55xx-3D
Step 10 : Use the three drawer fronts EB7 and eighteen connectors G
Tighten six connectors (G) in the drillings on the inside of each front (EB7).
Step 11 : Use the three drawer backs EB8, six wooden dowels F and twelve eccentrics H
Push a wooden dowel (F) in the drillings on the sides of each drawer back (EB8). Push two eccentrics (H)
into the drillings on the ends of the backs.
Step 12 : Use the three left drawer sides EB9 LH and the three right ones EB9 RH, six wooden dowels F,
twelve connectors G and twelve eccentrics H
Push a wooden dowel (F) in the drillings on the sides of each drawer side (EB9 LH and EB9 RH). Push
two eccentrics (H) into the drillings on the one end of the sides. Tighten two connectors (G) into the drillings
on the other end of the sides.
Commode met drie laden
Kommode mit drei Schubladen
Commode avec trois tiroirs
Chest of three drawers
Quax
First dreams
®
First steps
39