Quax INDIGO 54 03 55xx-3D Bauanleitung Seite 38

INDIGO
Quax
First dreams
®
First steps
Step 8 : Use the parts of steps 3 to 6
Push both bottom slats (EB3) with their wooden dowels in the drillings and over the connectors of the left side
(EB2 LH), tighten the eccentrics and hold the slats. Push both crossbars (EB4) with their wooden dowels in the
drillings and over the connectors of the side, tighten the eccentrics and hold the slat. Push the upper slat (EB5)
with its wooden dowels in the drillings and over the connectors of the side, tighten the eccentric and hold on.
Now push the right side (EB2 RH) with its connectors in the drillings and over the wooden dowels of all slats and
tighten the eccentrics. Put the top (EB1) upside down on a clean blanket, push the structure with its wooden
dowels into the holes and over the connectors of the top and tighten the eccentrics.
Step 9 : Use the parts of step 7, both backs EB6, the back profi le M and twenty wood screws K
Place the structure with its front on the blanket. Slide the backs (EB6) into the profi le (M). Place the backs parallel
to the back of the structure. Check if distance A = B. Now fi x the backs on the structure with the wood screws (K).
38
54 03 55xx-3D
Commode met drie laden
Kommode mit drei Schubladen
Commode avec trois tiroirs
Chest of three drawers