Beurer AS 50 Gebrauchsanleitung Seite 34

In which position does the device provide the most accurate
measurements?
The measuring precision of the activity sensor depends on the set-
ting for sensitivity, the running style of the user and also the position
of the device during measuring.
The sensitivity of the device has to be individually set depend-
ing on the way it is worn.
The activity sensor provides the best measuring results when at-
tached to your belt or trouser waistband.
Why does nothing happen when you press the buttons?
Check the state of the battery!
If the battery is dead, then no display is possible. Insert a new battery
(see chapter "Insert battery/Change battery").
Why is nothing shown on the display?
Check the state of the battery!

If the battery is dead, then no display is possible. Insert a new bat-

tery (see chapter "Insert battery/Change battery").
Check whether the battery has been inserted properly!

If not, insert the battery again (see chapter "Insert battery/Change

battery").

Please note
and it can possibly no longer work.
Why are my paces not recorded correctly?
Set the sensitivity of the device to your personal pace sequence

(see chapter "Recording the activity", section "Set the sensitivity").
Check the state of the battery!

If the battery is dead, then the device cannot measure correctly.

Insert a new battery (see chapter "Insert battery/Change battery").
: If the contact is incorrect, the device can be damaged
32