Beyerdynamic Unite TP Kurzanleitung Seite 24

24
The status indicator
information:
Indicator light
Off
Green
Flashing yellow
Yellow
Flashing green/yellow
Flashes red 5 times
Flashing red rapidly
In order to perform a simple pairing, proceed as described in
the following:
1. Set the desired group ID on the transmitter you want to
use for pairing. See chapter 5.2 for reference.
2. Insert only one transmitter into the charging slot of the
charger. If multiple transmitters are inserted into the
charging slots of the charger, the pairing will not start
and the status indicator
an error (see table). Alternatively, you can connect the
transmitter to the USB port on the charger via a USB
cable.
Unite TP – Bodypack Transmitter
on the charger shows the following
Operating status
Device is switched off
• Device is ready to use
• No pairing information saved
Pairing information is being
copied to the charger or receiver
Pairing information has been
stored in the charger
Device is being localised
• No transmitter
• Too many transmitters
• Operating error
• Charging error
on the charger will display