Beyerdynamic Unite TP Kurzanleitung Seite 19

Unite TP – Bodypack Transmitter
5.2 Set group ID
The group ID identifies devices that can be placed in a virtual
group. For example, all devices of a building, a tour group or a
conference room.
The factory preset group ID is 256. To set a group ID between
1 and 255, follow the steps below:
• Press and hold the menu button
the main menu.
• Use the multifunction button
the menu.
• Press the menu button
• Use the multifunction button
submenu.
• Press the menu button
• Use the multifunction button
ID.
• Press the menu button
Make sure to select the same group ID for all devices of a
desired group. Only devices that have the same group ID can
communicate with each other. Transmitters with other group
IDs are hidden. See the following diagram.
Group-ID 255
TP 1
RP RP
to open the required submenu.
to set an group ID.
to confirm the selected group ID.
TP 2
RP
for 2 seconds to activate
to select "System" from
to select the "Group ID"
to select the desired group
Group-ID 1
TP 3
RP
19