Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - Hama 00075298 Bedienungsanleitung

Lcd-thermometer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
Warning - Batteries
• Immediately remove and dispose of dead batteries from the
product.
• Only use batteries (or rechargeable batteries) that match the
specified type.
• Do not mix old and new batteries or batteries of a different
type or make.
• When inserting batteries, note the correct polarity (+ and -
markings) and insert the batteries accordingly. Failure to do so
could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep
them away from uncoated metal objects.
4. Getting Started
Open the battery compartment and remove the contact breaker. Close
the battery compartment cover.

5. Operation

Note – Settings
• When an item flashes, that item is selected and can be set.
• Hold down the UP button (6) or the DOWN button (5) to select
the values faster.
5.1Setting the date/time/time format
• After the batteries' contact breaker is removed, the normal time is
displayed in 12-hour format and a melody signals that the product
is ready for use. (Normal time mode)
• Press the MODE button (2) to switch between the 12 and 24-hour
formats. In the 12-hour format, PM is displayed before the time
from noon to one minute before midnight.
• Use the UP button (6) or DOWN button (5) to select the desired
format.
• Then press the SET button (4) to make the following settings in
order:
• Hours
• Minutes
• Year
• Month
• Day
• To select individual values, press the UP button (6) or the DOWN
button (5) and confirm each selection by pressing the SET button
(4).
• Press the SET button (4) to adopt the set value displayed and
to skip.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis