Getting Started; Operation - Hama TH-140 Bedienungsanleitung

Warning – Batteries
• Do not throw batteries in a re.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter the
environment. They can contain toxic, environmentally harmful heavy
metals.
• Immediately remove and dispose of dead batteries from the product.
• Avoid storing, charging or using batteries in extreme temperatures.

4. Getting started

Open the battery compartment cover (6), remove the contact breaker and
then close the battery compartment cover (6). The thermometer is now
ready for use.
4.1 Base (7)
To stand the product, the base (7) must be pulled out beneath the battery
compartment cover (6) and folded over.

5. Operation

5.1Setting the date/time/time format
• After removal of the batteries' contact breaker, the normal time is displayed
in 12-hour format and a melody signals that the product is ready for use.
(Normal time mode)
• Press the UP (4) or DOWN button (5) to switch between the 12 and 24-hour
formats.
• Use the UP button (4) or DOWN button (5) to select the desired format.
• Then press the SET button (3) to make the following settings:
• Hours
• Minutes
• To select individual values (hours/minutes), press the UP button (4) or the
DOWN button (5) and con rm each selection by pressing the SET button (3).
• Then complete the process using the MODE button (2).
• To change the set time, you must press the SET button (3) for 2 seconds; you
can then continue as described above.
• Pressing the MODE button (2) twice takes you to the date/year/month
settings. To enter the values, hold the SET button for approximately 3
seconds.
• To select individual values, press the UP button (4) or the DOWN button (5)
and con rm each selection by pressing the SET button (3).
• To con rm all your settings and return to the start display, you must press the
MODE button.
Note – Input
• Hold the UP button (4) and the DOWN button (5) to select the values faster.
• A selected item will ash to indicate that it can be set.
Note
• The day of the week is automatically selected when you set the date manually.
• The settings will automatically close if there is no entry for 20 seconds. The
settings that were made up to that point are not saved!
3