Philips HD8830 Handbuch Seite 13

English
14
Memo Memo Memo
Aroma plus
Espresso Cappuccino Coffee
Hot water
1
X
X 2 Milk clean
Calc
clean
Note: Replace the INTENZA+ filter after 2 months.
1 Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use. You will need it for
the descaling process.
2 Remove the filter from its packaging and immerse it in cold water with
the opening pointing upwards. Press the sides of the filter gently to let
out the air bubbles.
3 Turn the knob of the filter to the setting that corresponds to the water
hardness of the area you live in.
a Very soft water/ soft water
b Hard water (default)
c Very hard water
Note: You can test the water hardness with a water hardness test strip.
4 Place the filter in the empty water tank. Press it down until it cannot
move any further.
5 Fill the water tank with fresh water up to the MAX indication and slide it
into the machine.
6 Check if the ESPRESSO, CAPPUCCINO, COFFEE and HOT WATER/MILK
CLEAN buttons light up continuously.
7 Insert the hot water dispensing spout and press the HOT WATER/MILK
CLEAN button once. The HOT WATER/MILK CLEAN button flashes.
-
Let the machine dispense hot water until the water tank is empty.
-
The no water light lights up continuously.
8 Refill the water tank with fresh water up to the MAX level and place it
back into the machine.