Quax INDIGO Bauanleitung Seite 35

INDIGO
54 05 21xx
4. Assembling the night table
Step 1 : Use both long crossbars ES3, both short crossbars ES2, eight eccentrics C, the four legs ES1,
eight connectors B and eight wooden dowels A
Push two eccentrics (C) in the drillings on the inside of the crossbars (ES2 and ES3). Tighten a wooden
dowel (A) in the holes on the ends of the crossbars. Fasten two connectors (B) in the drillings on the inside
of the legs (ES1). To be followed below.
Step 2 : Use the parts of step 1
Push the legs (ES1) with their connectors into the holes and over the wooden dowels of short crossbars
(ES2). Tighten the eccentrics. Push the long crossbars (ES3) with their wooden dowels into the holes and
over the connectors of a leg frame. Tighten the eccentrics. Push the other leg frame with its connectors in
the drillings and on the wooden dowels of the long crossbars. Tighten the eccentrics.
Nachttafel met een open vak en lade
Nachttisch mit Fach und Schublade
Table de nuit avec casier et tiroir
Night table with a drawer
Quax Quax
First dreams First dreams
® ®
First steps First steps
35