Camera Reset; Lens Adjustment - Instar IN-7011HD Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please press
the small reset button on the connection cable
of your camera for 15-20 seconds. After that
time please let go of the reset button. After the
reset, the camera will restart, which can take
up to 60 seconds, and all data in the camera
will be set back to factory defaults. Therefore,
please use a network cable or WPS to recon-
nect the camera to your network. For more in-
formation on how to install your camera again,
please visit: http://install.instar.com. Once
you connect the camera to the network, use
the INSTAR Camera Tool to find out the cam-
era's IP address and open the camera's WebUI
to start configurating your camera again.

9. Lens Adjustment

The IN-7011 standard lens has a depth of field (also focus range) that is adjusted
to a distance of approx. 10 - 15m. In case your area of interest is out of focus,
you will have to adjust the lens accordingly.
For the adjustment of IN-7011HD lens focal, please refer to our video online.
There are step-by-step illustrations to guide you. Please visit:
Go to http://install.instar.com
http://lens7011.instar.com
10
Press 15-20s
to reset camera
10-EN