Instar IN-7011HD Kurzanleitung

1
Attach the wifi antenna to the
connector as shown above (User Manual Chapter
3#1).
4
press the cameras reset button
activate the cameras WPS service (User Manual
Chapter 3#9). Wait for max. 5min for the camera to
connect to your Wifi network. If you press it for IOS,
the camera will be reset to it's factory defaults!
7
Camera Name
Camera ID
Default User Name
Default Password
O
The QR code contains all the necessaryinformation
to add your camera. Please be aware that the
default login credentials will be used. If you want to
change the default password please check the
Quick Installation Guide. The password can only
be changed in the web user interface.
cameras antenna Plug in the power supply
Chapter 3 #11) to start the camera.
5
for 3 seconds to Start our Android
Vision. Choose to add a new p2p camera
and start the QR code scanner. Your QR code
is located on a lable on the camera case (s.
above).
8
The app will now connect to your cameras
live stream and you will be able to activate
the audio
microphone) and to take snapshots.
(User
Manual
Madel N': IN.7C11H0
NSTAR
FCZCD
or iPhone app Instar
O
stream (needs an external
Plug & play
3
WPS WLAN
If your router supports the WPS (Wireless
Protected Setup) function, please press the
WPS button on the router, which
similar to the example above.
6
O
Scan the code to add your IN-5907 as a new
p2p camera and confirm the settings. If you
already changed the camera's admin login,
please adjust this in the following
as well.
9
STAR
n
TheWPS / p2p method allows you to quickly
connect your camera and
cameras live stream. Please
Quick Installation Guide for instruction
how to access additional camera features.
looks
dialogue
Guide
check the
refer to the
on