Herunterladen Diese Seite drucken

Behringer EUROLIVE B207MP3 Schnellstartanleitung Seite 6

Vorschau ausblenden Andere Handbücher für EUROLIVE B207MP3:

Werbung

10
EUROLIVE B207MP3
EUROLIVE B207MP3 Controls
(1)
(13)
(12)
(11)
(5)
(15)
(16)
(2)
(4)
(3)
(6)
(7)
(9)
(8)
(10)
(14)
(17)
(18)
(19)
11
Quick Start Guide
(EN)
Step 2: Controls
(1)
MP3 PLAYBACK input accepts USB
connections from memory devices
with MP3 fi les.
(2)
LCD DISPLAY shows the status of
the MP3 fi le being played.
(3)
MAIN LEVEL Adjusts the
overall volume.
(4)
MP3 LEVEL independently
controls the playback level of the
currently-playing MP3 fi le.
(5)
PHANTOM Sends 48 V of phantom
power to the MIC/LINE inputs to
power condenser microphones.
The LED lights when the PHANTOM
button is engaged.
(6)
MP3 PLAYBACK section manages
navigation and playback of fi les
from a USB fl ash drive.
(7)
DISP(LAY)/MODE buttons control
the MP3 player's play mode and
also serve as contrast controls for
the LCD display.
(8)
MIC/LINE INPUTS Route line-
level input signals into these
combination jacks using XLR,
balanced ¼" TRS, or unbalanced
¼" TS connectors.
(9)
LEVEL 1-3 Adjusts the input
sensitivity for the MIC/LINE
combination jacks.
(10)
INSTRUMENT Press this button
to optimize the MIC/LINE 2 input
for unbalanced signals from
instruments using ¼" TS plugs.
(11)
CD INPUT Route signals from
CD players, MP3 players, DJ mixers,
and other line-level sound sources
into these RCA jacks.
(12)
LEVEL 4 Adjusts the input
sensitivity (gain) for the CD INPUT
RCA jacks.
(13)
EQ Cut or boost treble, mid, and
bass frequencies by ±15 dB.
(14)
HEAT SINK Make sure you allow
plenty of space behind the speaker
for heat dissipation.
(15)
POWER SWITCH Turns the speaker
on and off .
(16)
POWER SOURCE Plug the included
IEC power cable into this jack.
(17)
THRU Route a signal to another
speaker or device by using a
balanced cable with a male XLR
plug. The THRU jack draws a signal
from just before the MAIN LEVEL
and EQ section, combined with the
MAIN IN signal.
(18)
LEVEL Adjust the level of the
outgoing THRU signal.
(19)
MAIN IN Connect the THRU signal
from another speaker using a
balanced cable with either a female
XLR plug or a balanced ¼" TRS plug.

Werbung

loading