Beem Fresh Aroma Perfect Thermostar Bedienungsanleitung Seite 35

33
Setting the Coff ee Strength
Keep pressing the button
display (19).
Weak coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the de-
vice has been disconnected from the power supply for more than a minute.
Aroma Button
The brewing time can be extended with the aroma button
time will give the coffee a slightly more intense fl avour.
1. Press the aroma button
cups. appears on the display (19).
2. Press the aroma button
Keep-Hot Function
The device has a keep-hot function which can be switched on and off using the button
(23).
We recommend switching on the keep-hot function when using the device with a glass
jug. The keep-hot function must be switched off when using the device with a thermal jug.
1. Prepare the coffee machine for making coffee with coffee powder or coffee beans
and set your desired number of cups, coffee strength etc.
2. Press the button
play (19).
3. Start the brewing process (see the "Preparation" chapter). The hotplate remains
switched on after the end of the brewing process.
4. The keep-hot function switches off automatically after 40 minutes. If you want to stop
the keep-hot function prematurely, press the button
ing on the chosen preparation type).
If the thermal jug is used, care must be taken to ensure that the keep-hot function
is switched off. Press the
A suitable thermal jug is available via our website www.beem.de or from our customer
service department on request.
02041_DE-EN-FR-NL_A5_V1.indb 33 02041_DE-EN-FR-NL_A5_V1.indb 33
(26) until the coffee strength you want is shown on the
to extend the brewing time for the chosen number of
again to switch the extended brewing time off again.
before the brewing process is started.
button if necessary, and
(24). The extended brewing
appears on the dis-
(18) or (20) (depend-
will go out on the display.
03.08.2017 11:39:00 03.08.2017 11:39:00
EN