Adjusting The Rinse Aid Dispenser - KKT KOLBE GS60ED Benutzerhandbuch

Using the dishwasher

3.5 Adjusting the rinse aid dispenser

The amount of rinse agent that consumes the dishwasher,
also depends on the water hardness. With the setting of the
rinse aid dosage you should experiment until you find the
optimum setting that ensures the best results.
• We recommend that the first flushing adjust the rinse aid
dispenser at number 4.
• If there are water spots on the dishes or the dish is not
dry enough, move the arrow counter-clockwise and set it
to the next higher number.
• Set the rinse aid dosage to no water stains will last as
long a upward.
• If there are streaks and stripes on the dishes, the setting
of the rinse aid dosage could be too high. This causes
foam during the flush. Move the arrow clockwise to the
next lover number.
Dosage of dishwasher tablets
The dosing of the detergent must each time the flushing are
filled (except for the flush mode).
• Open the lid of the detergent container (1) and fill in the
detergent (2).
55