Resetting The Adjustments; Technical Features; Power Saving Function - Sony GDM-5402 Bedienungsanleitung

Resetting the adjustments

This monitor has the following three reset methods. Use the 0
(reset) button to reset the adjustments.
Resetting a single adjustment item
, m/M buttons to select the adjustment item you want
Use the
to reset, and press the 0 (reset) button.
Resetting all of the adjustment data for the
current input signal
Press the 0 (reset) button when no menu is displayed on the
screen.
Note that the following items are not reset by this method:
• on-screen menu language (page 7)
• adjustment mode in the COLOR menu (EASY, EXPERT,
sRGB) (page 12)
• on-screen menu position (page 13)
• control lock (page 13)
Resetting all of the adjustment data for all input
signals
Press and hold the 0 (reset) button for more than two seconds.
Note
The 0 (reset) button does not function when
LOCK) is set to ON.
14

Technical Features

Power saving function

This monitor meets the power-saving guidelines set by VESA,
E
NERGY
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption in three stages as shown below.
Power mode Power consumption
normal
operation
1 standby
2 suspend
(sleep)*
3 active off**
(deep sleep)*
power off
* "Sleep" and "deep sleep" are power saving modes defined by the
** When your computer enters a power saving mode, the input signal is
(CONTROL
S
TAR, and NUTEK. If the monitor is connected to a
≤ 145 W
≤ 100 W
≤ 15 W
Approx. 1 W
0 W
Environmental Protection Agency.
cut and NO INPUT SIGNAL appears on the screen. After a few
seconds, the monitor enters power saving mode.
1 (power)
indicator
green
green and orange
alternate
green and orange
alternate
orange
off