Getting Started; Using Your Monitor; Preset And User Modes - Sony CDP-100ES Bedienungsanleitung

Getting Started

Before using this monitor, please make sure that the following
items are included in your package: Multiscan 100ES/200ES
monitor (1), power cord (1),
Disk " (1), and this operating instruction manual (1).
This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability. Although
this monitor will sync to other platforms running at horizontal
frequencies between 30 and 70 kHz, including Macintosh and
Power Macintosh system, a cable adapter is required. Please
consult your dealer for advice on which adapter is suitable for
your needs.
Step 1: With the computer switched off, attach the video
signal cable to the video output.
IBM or compatible
computer
to video output
Macintosh or compatible
computer
to video output
Macintosh adapter (not supplied)
Step 2:
Attach the power cord to the monitor and the other
end to a power outlet.
Power cord (supplied)
to a power outlet
Step 3:
Turn on the monitor and computer.
Step 4: If necessary, adjust the user controls according to
your personal preference.
The installation of your Multiscan 100ES/200ES is complete.
Enjoy your monitor.
1) VGA is a trademark of IBM Corporation.
2) VESA is a trademark of the non-profit organization, Video
Electronics Standard Association.
3) Macintosh is a trademark of Apple Computer Inc.
®
4) Windows is a registered trademark of Microsoft
Corporation in the United States and other countries.
4
Windows95 Monitor Information
"

Using Your Monitor

Preset and User Modes

The Multiscan 100ES/200ES has factory preset modes for the 8 most
popular industry standards for true "plug and play" capability.
For less common modes, the Multiscan 100ES/200ES's Digital
Multiscan Technology will perform all of the complex adjustments
necessary to ensure a high quality picture for any timing between
30 and 70 kHz.
CPD-100ES/100EST and CPD-200ES/200EST
No. Resolution Horizontal
(dots × lines)
Frequency
640 × 480
1 31.5 kHz
640 × 480
2 43.3 kHz
800 × 600
3 46.9 kHz
800 × 600
4 53.7 kHz
832 × 624
5 49.7 kHz
1024 × 768
6 60.0 kHz
1024 × 768
7 68.7 kHz
1280 × 1024
8 64.0 kHz
For the customers using the Windows
I
nstall the new model information of the Sony computer display
from "Windows95 Monitor Information Disk" into your PC. (To
install the file, refer to the attached "About the Windows95 Monitor
Information Disk/File".)
This monitor complies with "VESA DDC", the standards of
Plug&Play. If your PC/graphic board complies with DDC, select
"Plug and Play Monitor (VESA DDC)" or this monitor's model
name (CPD-100ES/100EST or CPD-200ES/200EST) as "Monitor
type" from "Control Panel" on Windows95. Some PC/graphic
boards do not comply with DDC. Even if they comply with DDC,
they may have some problems on connecting to this monitor. In this
case, select this monitor's model name (CPD-100ES/100EST or
CPD-200ES/200EST) as "Monitor type" on Windows95.
Recommended horizontal timing conditions
Horizontal sync width should be: >1.0 µsec.
Horizontal blanking width should be: >3.6 µsec. (Multiscan 100ES)/
Vertical sync width should be: < 560 µsec.
Note
CPD-100ES/100EST and CPD-200ES/200EST does not apply to
"
Macintosh 21 color mode.
Vertical Graphics
Frequency
Mode
60 Hz 1)
VGA Graphic
85 Hz 2)
VESA
75 Hz 2)
VESA
85 Hz 2)
VESA
75 Hz 3)
Macintosh
16 " Color
75 Hz 2)
VESA
85 Hz 2)
VESA
60 Hz 2)
VESA
®4)
95
>3.0 µsec. (Multiscan 200ES).