Attaching The Stand; Selecting Function - AIPTEK RAFFAELLO Kurzanleitung

2) Attaching the stand

Insert the front end of the stand into
the slot on the back frame as indicated.
Push the stand upward (
stand is properly locked. To detach the
stand, push the stand downward (
until it is removed.

3) Selecting function

Power on the photo frame, and the main
interface will show up after the start-up
screen. If the "Auto-Play" (slideshow) feature
is enabled, the slideshow of pictures stored in
the internal memory or memory card/USB drive
will be launched automatically. You can press
the ESC button to return to the main interface
at any time. There are four items in the main
interface: Photo, Favorite, File and Setup.
4) The Photo function
This function requires a memory card to be
inserted or a USB drive to be connected. If
both a memory card and a USB drive are
present, only the content of the USB drive
will be read. After selecting this function, the
pictures in the memory card or USB drive will
be displayed in either Thumbnail mode or
File Manager mode (depending on the Setup
-> Browse setting).

) until the
)