Samsung MM-J430D Bedienungsanleitung Seite 26

Basic Functions
\ Once you have turned off the Micro Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
\ The Micro Component system may not search or
connect properly in the following cases:
- If there is a strong electrical field around the
Micro Component.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
\ Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
To disconnect the Bluetooth device
from the Micro Component
You can disconnect the Bluetooth device from
the Micro Component. For instructions, see the
Bluetooth device's user manual.
• The Micro Component will be disconnected.
• When the Micro Component is disconnected
from the Bluetooth device, the Micro
Component will display BT DISCONNECTED
; BT READY on the its display.
To disconnect the Micro Component
from the Bluetooth device
Press the another mode button on the front panel of
the Micro Component to switch from Bluetooth mode
to another mode or turn off the Micro Component. The
currently connected device is disconnected.
| NOTES |
\ The connected Bluetooth device will wait a
certain amount of time for a response from
the Micro Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
\ In Bluetooth connection mode, the Bluetooth
connection may be lost if the distance
between the Micro Component and the
Bluetooth device exceeds 16.25 feet (5
meters).
|
26
English
\ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Micro Component to restore the
pairing with the Bluetooth device.
\ The Micro Component automatically turns off
after 25 minutes in the Ready mode.
\ When a Bluetooth device is connected to the
Micro Component system, the Component
system automatically switches to the
Bluetooth mode if it is in a different mode
(except when it is displaying "REQUEST" in
the TV SoundConnect mode if the Bluetooth
device haven't been paired with the Micro
Component before.).