Resolution; Video Out Signal; Hdmi Format; Audio - Samsung MM-J430D Bedienungsanleitung

• On : The original resolution of the DVD disc will be
output to the TV direct.
• Off : The output resolution will be fixed according to
the Resolution previously set, regardless of the
resolution of the disc.
| NOTES |
This will optimize the picture quality according to the
\
content (In the DVD disc, etc) that you want to play and
the product or your BD Wise-compliant Samsung TV.
If you want to change the resolution in BD Wise mode,
\
you must set BD mode to Off in advance.
BD Wise will be disabled if the product is connected to
\
a device that does not support BD Wise.

Resolution

Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
• 480p(576p) : Outputs 480 lines of progressive
video.
• 720p : Outputs 720 lines of progressive video.
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p: Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal resolution
when connected via HDMI to a TV with the BD
Wise feature. (The BD Wise menu item appears
only if BD Wise is set to On.)
| NOTES |
If Component or Composite is connected, the resolution
\
supports only 480i(576i).
1080P may not appear depending on TV.
\

Video Out Signal

Different countries apply different TV standard.You
can select from NTSC or PAL.
• NTSC : You can set to the NTSC video format
• PAL : You can set to the PAL video format
| NOTE |
Depending on the type(NTSC or PAL) of main unit you
\
have, the TV screen displayed may be different.

HDMI Format

You can optimize the color setting from the HDMI
output. Select a connected device Type.
• Monitor : Select if connected to a Monitor via
HDMI.
• TV : Select if connected to a TV via HDMI.

Audio

DRC (Dynamic Range Compression)

This feature balances the range between the
loudest and quietest sounds. You can use this
function to enjoy Dolby Digital sound when
watching movies at low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital
TV. If this occurs, adjust the audio delay time to
match the video.
• You can set the audio delay time between 0 mS and
300 mS. Set it to the optimal status.

Speaker Selection

The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
• Audio System : Video is transmitted over the HDMI
connection cable only, and audio is
output through the product speakers
only.
• TV Speaker : Both video and audio signals are
transmitted over the HDMI connection
cable, and audio is output through your TV
speakers only.
| NOTES |
The default setting of this function is Audio System .
\
HDMI Audio is automatically down-mixed to 2ch for TV
\
speakers.
When TV Selection is set to TV Speaker, EQ/POWER
\
BASS/Recording/MY KARAOKE/VOL/MUTE doesn't
work.
With Speaker Selection set to 'TV Speaker', the volume
\
can be adjusted only using the TV remote control.
|
15
English